GAMR Play Pad not connecting to iPhone

If your GAMR Play Pad shows on your iPhone but won’t connect, here are a few things you can check.

Step 1: Make sure your Play Pad is in pairing mode

1. Press and hold the Power button on the headboard of your GAMR Play Pad.
2. Confirm that the GAMR "G" logo is blinking.
3. A blinking "G" logo means your Play Pad is in pairing mode.

Step 2: Forget your GAMR Play Pad

1. On your iPhone, open Settings and go to Bluetooth.
2. Select your Play Pad, listed as Gamr<mac address>.
3. Tap Forget This Device.
4. Confirm by tapping Forget Device.

Step 3: Turn Bluetooth off and on again

1. Turn Bluetooth off.
2. Turn it back on.

Step 4: Pair your Play Pad again

1. Look for Gamr<mac address> under Devices.
2. Select Gamr<mac address>.
3. The message "Gamr<mac address> would like to pair with your iPhone" appears.
4. Tap Pair.

Step 5: Confirm the connection

1. Your Play Pad appears under My Devices with the status Connected.
2. The blinking "G" logo turns into a steady glow on your GAMR Play Pad.

Start playing

Launch GAMR Universe App or explore other controller-supported games and start playing with your GAMR Play Pad.